What environmental protection measures does the company have?

Time: 2025/06/18

1.  Waste Gas Treatment

  • Injection Molding Waste Gas Injection molding waste gas is collected and discharged at height through an exhaust pipe (DA001) not less than 15 meters, ensuring compliance with the special emission limits in the "Emission Standard of Pollutants for Synthetic Resin Industry" (GB31572-2015).

  • Crushing Dust The crusher is set in an independent crushing workshop, which is sealed during operation to prevent dust leakage.

  • Feeding Dust Feeding dust is treated through a matching dust collector and an independent sealed workshop is set up.

2.  Wastewater Treatment

  • Domestic Sewage Domestic sewage is pretreated by a septic tank, then connected to the municipal sewage network, and finally treated and discharged by Taizhou Water Treatment Development Co., Ltd. after meeting standards.

  • Connection Standards Implement the Class III standard of the "Integrated Wastewater Discharge Standard" (GB 8978-1996), with ammonia nitrogen and total phosphorus referring to the "Indirect Discharge Limits of Nitrogen and Phosphorus Pollutants in Industrial Enterprise Wastewater" (DB33/887-2013).

3.  Noise Control

  • Equipment Selection Select low-noise equipment and strengthen equipment management and maintenance.

  • Reasonable Layout Reasonably arrange noise sources and carry out factory boundary greening to ensure factory boundary noise meets standards.

4.  Solid Waste Treatment

  • General Solid Waste Build temporary storage sites for general solid waste that meet requirements for leakage prevention, rain protection, and dust control.

  • Hazardous Waste Build temporary storage sites for hazardous waste with "four protections" (windproof, rainproof, sunproof, and leakage prevention), and sign entrusted disposal contracts with qualified units.

Previous:

Next: